February 3, 2016
In
12
For inquiries on our product or quality, please contact us at marketingQnQ@yahoo.com...
Archive
February 3, 2016
In
11
After twenty-four hours the tiles are set and can be washed using water and cleaning agent. The tiles is now ready to be stepped on!...
February 3, 2016
In
10
After twelve hours, check if there are gaps under the tiles with a hammer, re-tile if necessary....
February 3, 2016
In
09
After one hours, clean up the cement residue and other wastes on the tiles....
February 3, 2016
In
08
Try knocking the installed tiles with hammer handle to confirm its fullness....
February 3, 2016
In
07
For corner installation, use proper dose of sticky cement and level. Keep the thickness to 1cm and cover the corner with another tile before gently hammering it using a wooden hammer....
February 3, 2016
In
05
To avoid misalignment, leave a gap between each ceramics of 3mm for external installation, 1.5mm for interior installation. 3-5mm for floor installation....
February 3, 2016
In
04
Apply cement #325, cement #425 or a mixture of cement and tile strengthening agent to the intended surface....
February 3, 2016
In
03
Draw lines on the surface as paving guidance and make sure that the installation ground is level by using an altitude meter....
- 1
- 2